No products
Viewed products
-
GMW16925
GMW16925 1st Edition, April 1, 2013...
-
NAS 1057 Rev. 10
NAS 1057 Rev. 10...
AS There are 8475 products.
-
AS 2941-2008
AS 2941-2008 Fixed fire protection installations - Pumpset systems standard by Standards Australia, 01/01/2008
$68.96 $160.37 -57%In Stock -
AS 3580.4.1-2008 [...
AS 3580.4.1-2008 [ Withdrawn ] Methods of sampling and analysis of ambient air - Determination of sulfur dioxide - Direct reading instrumental method standard by Standards Australia, 01/01/2008
$24.97 $58.07 -57%In Stock -
AS 1141.11.2-2008/Amdt 1-2016
AS 1141.11.2-2008/Amdt 1-2016 Methods for sampling and testing aggregates - Particle size distribution for vision sizing systems Amendment by Standards Australia, 01/01/2008
$5.40 $12.56 -57%In Stock -
AS 1141.22-2008/Amdt 1-2016
AS 1141.22-2008/Amdt 1-2016 Methods for sampling and testing aggregates - Wet/dry strength variation Amendment by Standards Australia, 01/01/2008
$5.40 $12.56 -57%In Stock -
AS 1141.26-2008/Amdt 1-2016
AS 1141.26-2008/Amdt 1-2016 Methods for sampling and testing aggregates - Secondary minerals content in igneous rocks Amendment by Standards Australia, 01/01/2008
$5.40 $12.56 -57%In Stock -
AS 1141.32-2008/Amdt 1-2016
AS 1141.32-2008/Amdt 1-2016 Methods for sampling and test aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates Amendment by Standards Australia, 01/01/2008
$5.40 $12.56 -57%In Stock -
AS 2658-2008/Amdt 3-2013
AS 2658-2008/Amdt 3-2013 LP Gas - Portable and mobile appliances Amendment by Standards Australia, 01/01/2008
$5.40 $12.56 -57%In Stock -
AS 2658-2008/Amdt 2-2011
AS 2658-2008/Amdt 2-2011 LP Gas - Portable and mobile appliances Amendment by Standards Australia, 01/01/2008
$5.40 $12.56 -57%In Stock -
AS 2805.3.1-2008/Amdt 1-2011
AS 2805.3.1-2008/Amdt 1-2011 Electronic funds transfer - Requirements for interfaces - PIN management and security - General Amendment by Standards Australia, 01/01/2008
$5.40 $12.56 -57%In Stock -
AS 1100.301-2008/Amdt 1-2011
AS 1100.301-2008/Amdt 1-2011 Technical drawing - Architectural drawing Amendment by Standards Australia, 01/01/2008
$5.40 $12.56 -57%In Stock -
AS ISO 7.1-2008
AS ISO 7.1-2008 Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation standard by Standards Australia, 01/01/2008
$31.30 $72.80 -57%In Stock -
AS ISO 7.2-2008
AS ISO 7.2-2008 Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges standard by Standards Australia, 01/01/2008
$50.56 $117.59 -57%In Stock
