No products
Viewed products
-
GOST 545
GOST 545 1976 Edition, October 22,...
GOST There are 33035 products.
-
GOST 22220
GOST 22220 1976 Edition, November 1, 1976 "Cables, wires and cords. Method of determination of PVC insulation and sheaths resistance to cracking and deformation at elevated temperature"
$28.35 $45.00 -37%In Stock -
GOST 2639
GOST 2639 1976 Edition, October 28, 1976 Motion-picture projectors for 35- and 70-mm films. Types. Basic technical data. Technical requirements
$36.54 $58.00 -37%In Stock -
GOST 244
GOST 244 1976 Edition, October 28, 1976 "Sodium thiosulphate, crystalline. Specifications"
$36.54 $58.00 -37%In Stock -
GOST 6850
GOST 6850 1976 Edition, October 28, 1976 Motion-picture projectors for 16-mm films. Types. Basic technical data. Technical requirements
$28.35 $45.00 -37%In Stock -
GOST 22082
GOST 22082 1976 Edition, August 25, 1976 Injection mold bases; detail-blanks and details of injection molds. Technical conditions
$28.35 $45.00 -37%In Stock -
GOST 22068
GOST 22068 1976 Edition, August 25, 1976 Rectangular ejector plate-blanks of injection molds. Design and dimensions
$22.05 $35.00 -37%In Stock -
GOST 22076
GOST 22076 1976 Edition, August 25, 1976 Supporting disks of injection molds. Design and dimensions
$22.05 $35.00 -37%In Stock -
GOST 22077
GOST 22077 1976 Edition, August 25, 1976 Sprue bushings of injection molds. Design and dimensions
$22.05 $35.00 -37%In Stock -
GOST 22064
GOST 22064 1976 Edition, August 25, 1976 Injection mold bases with takeoff and ejector plate. Design and dimensions
$61.11 $97.00 -37%In Stock -
GOST 22073
GOST 22073 1976 Edition, August 25, 1976 Guide bushings of injection molds. Design and dimensions
$22.05 $35.00 -37%In Stock -
GOST 22065
GOST 22065 1976 Edition, August 25, 1976 Plate-blanks of injection molds. Design and dimensions
$28.35 $45.00 -37%In Stock -
GOST 22079
GOST 22079 1976 Edition, August 25, 1976 Shanks of injection molds. Design and dimensions
$22.05 $35.00 -37%In Stock
