No products
GOST There are 33035 products.
-
GOST 11378
GOST 11378 1975 Edition, November 15, 1975 Insert blanks of sintered alloys for parting blades. Types and dimensions
$28.35 $45.00 -37%In Stock -
GOST 891
GOST 891 1975 Edition, November 15, 1975 Paper and board for textile spools and tapers. Specifications
$28.35 $45.00 -37%In Stock -
GOST 11359
GOST 11359 1975 Edition, November 15, 1975 Overhead line hardware. Range of mechanical failing loads and hard connection. Parameters and dimensions
$22.05 $35.00 -37%In Stock -
GOST 6567
GOST 6567 1975 Edition, November 15, 1975 Flat knifes with rectangular cutter edge for wood shaping
$36.54 $58.00 -37%In Stock -
GOST 21169
GOST 21169 1975 Edition, September 29, 1975 "Hunting cartridges 7,62x51. Types and basic dimensions"
$22.05 $35.00 -37%In Stock -
GOST 19438.13
GOST 19438.13 1975 Edition, September 29, 1975 Low-power electronic tubes and valves. Methods of measurement of conversion transconductance and electrode currents under conversion conditions
$36.54 $58.00 -37%In Stock -
GOST 19438.10
GOST 19438.10 1975 Edition, September 29, 1975 Low-power electronic tubes or valves. Methods of test and measurement under rectitying conditions
$36.54 $58.00 -37%In Stock -
GOST 19438.12
GOST 19438.12 1975 Edition, September 29, 1975 Low-power electronic tubes and valves. Methods of measurement of plate current and currents of grids having positive potential
$28.35 $45.00 -37%In Stock -
GOST 8882
GOST 8882 1975 Edition, September 28, 1975 Single row radial sealed ball bearings. Types and boundary dimensions. Technical requirements
$36.54 $58.00 -37%In Stock -
GOST 7478
GOST 7478 1975 Edition, September 26, 1975 Cell graphite Specifications
$22.05 $35.00 -37%In Stock -
GOST 14952
GOST 14952 1975 Edition, September 25, 1975 Combined centre drills. Specifications
$54.81 $87.00 -37%In Stock -
GOST 21153.6
GOST 21153.6 1975 Edition, September 25, 1975 Rocks. Method for the determination of bend strength limit
$22.05 $35.00 -37%In Stock
