IEC 61109 Ed. 1.0 b:1992 [ Withdrawn ] Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria standard by International Electrotechnical Commission, 03/31/1992
IEC 60169-25 Ed. 1.0 b:1992 Radio-frequency connectors - Part 25: Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN) standard by International Electrotechnical Commission,...
IEC 60044-6 Ed. 1.0 b:1992 [ Withdrawn ] Instrument transformers - Part 6: Requirements for protective current transformers for transient performance standard by International Electrotechnical Commission, 03/30/1992
IEC 60800 Ed. 2.0 b:1992 [ Withdrawn ] Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation standard by International Electrotechnical Commission, 03/31/1992
IEC 60642-3 Ed. 1.0 b:1992 Piezoelectric ceramic resonators - Part 3: Standard outlines standard by International Electrotechnical Commission, 03/15/1992
IEC 61094-2 Ed. 1.0 b:1992 [ Withdrawn ] Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique standard by International Electrotechnical Commission, 03/15/1992
IEC 61115 Ed. 1.0 b:1992 Expression of performance of sample handling systems for process analyzers standard by International Electrotechnical Commission, 03/15/1992
IEC 60115-2-2 Ed. 1.0 b:1992 [ Withdrawn ] Fixed resistors for use in electronic equipment - Part 2: Blank detail specification: Fixed low-power non-wirewound resistors. Assessment level F standard by International Electrotechnical Commission, 03/15/1992
IEC 61126 Ed. 1.0 b:1992 Procedure for use in the preparation of maximum lamp outlines standard by International Electrotechnical Commission, 03/15/1992
IEC 60603-11 Ed. 1.0 b:1992 Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors) standard by International Electrotechnical Commission, 03/15/1992
IEC 60115-4-2 Ed. 1.0 b:1992 [ Withdrawn ] Fixed resistors for use in electronic equipment - Part 4: Blank detail specification: Fixed power resistors. Assessment level F standard by International Electrotechnical Commission, 03/15/1992
IEC 60115-6-102 Ed. 1.0 b:1992 [ Withdrawn ] Fixed resistors for use in electronic equipment - Part 6: Detail specification: Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1 (single-in-line network) standard by...